COP-USA DVR2716XD-L - Manual (Page 108)

8/16-CH DVR Quick Start Guide
3
3.2 Shutdown
You can shut down the device by using IR remote controller and mouse.
By IR remote controller:
Step1: Press Power button. This will bring up a shutdown window. The unit will
shut down by clicking “OK” button.
Step2: Disconnect the power
By mouse:
Step1: Enter into
Menu and select “Shut Down” icon. This will take you
to a shutdown window.
Step2: Click OK. Then the unit will power off after a while.
Step3: Disconnect the power
4. Setup Wizard
 After the device starts, a setup wizard pops up. You can set up time，
network , record and disk management.
Click Device name box to popup a keyboard as follows:
It supports digits, alphabets and symbols as inputs. Click Shift button to input
Capital letters and symbols; click Shift button again to return.

Click „Next‟ button to bring up a network setup window.