COP-USA WS08 - Manual (Page 13)

Network Video Server/IP Camera User Manual
13
Step I: Connect DVS/IP Camera to network by network cable
Step II: Plug the equipped power adaptor to DVS/IP Camera power socket, then connect with
external electricity
Step III: Turn on the computer, connect to front-end DVS/IP Camera, and then conduct
software setting
Instructions: Also may connect the DVS/IP Camera with computer directly
3. DVS/IP Camera access
3.1. DVS/IP Camera login
3.1.1. Steps of login
 Step 1: add a IP address to computer so as to access DVS/IP Camera, for example:
192.168.1.99
, the detailed operation is as follow:
If you are using Windows 2000/XP operating system
3. After entering the operating system, click【Start】→【Setting】→【Control Panel】, open “Network