COP-USA WS08 - Manual (Page 9)

Network Video Server/IP Camera User Manual
9
Interface description:
1.『VIN1,VIN2,VIN3,VIN4』4 channel video input, standard BNC socket
2.『ANT』antenna interface (WIFI/3G antenna)
3.『AIN1,AIN2,AIN3,AIN4』4 channel audio input, standard BNC socket
4.『DC12V』connect to 12V DC through voltage stabilizer, please use matching voltage stabilizer
power supply.
5.『Alarm Out』alarm output, 4 channel switching; A1, in 1 group; A2, B2 in 1 group; A3, B3 in 1
group; A4, B4 in 1 group
6.『Alarm In』alarm input, 4 channel switching; S1, G in 1 group; S2, G in 1 group; S3, G in 1
group; S4, G in 1 group;
7.『+，-』RS485 interface
8.『G』GND is common ground wire
9.『R,T』RS232 interface terminal, T: Transmitting terminal, R: receiving terminal
10.『+12V』output power supply (12V, 800mA) shared by ground wire G.
11.『LINE IN』audio talkback input, connecting to active audio acquisition device
12.『LINE OUT』audio talkback output, connecting to active audio acquisition device
13.『NET』RJ45 socket of standard network
14.『RST』reset button, it is used to restore factory default parameters of device, including IP
address and user password.
3) Definition for the interface of gun shaped network camera panel: