Cub Cadet 4 x 2 Big Country - Poly Bed & Steel Bed - Manual (Page 74)

4 X 2 Drive System - (Steel Bed)
70
13.13.If it is necessary to remove the bearing, use a
bearing puller. See Figure 13.13.
14. TRANSAXLE: AXLE TUBES
14.1. If brake drum has not already been removed
from the axle tube, perform the following steps:
14.2. Remove the brake drum. See Figure 14.2.
NOTE: On transaxles that have never had the
brake drum removed, there may be a speed nut
on one of the studs. The speed nut is there for
factory assembly and shipping purposes. It can
be removed and discarded.
14.3. Remove the R-shaped clips that hold the brake
actuator to the brake shoes, and remove the
actuator. See Figure 14.3.
Figure 13.13
Gear Puller
Figure 14.2
Speed Nut
Brake Drum
Figure 14.3
R-shaped clips
Brake Shoes