Cub Cadet T2-HP - Manual (Page 37)

T2 ® 33
Refer to Figure 27
disassembly
1 . Remove the expansion tank hose (141) .
2 . Remove the O-ring (142) from the expan-
sion tank fitting (140) and discard.
3. Remove the expansion tank fitting (140).
Inspection
1. Inspect the fitting for damage and replace
if necessary .
assembly
1. Install the fitting into the main housing. Refer
to torque chart on page 15 .
2. Install a new O-ring (142) onto the fitting.
3 . Place the expansion tank hose (141) onto
the fitting (140).
eXpansIOn Tank HOse and fITTInG
figure 27, expansion Tank Hose and fitting
141
142
140