EKLIPES EKLIPE Black Classic Cobra Ultimate Motorcycle USB Charging System - Manual (Page 5)

Line up the slide rails to the mount from the top of the mount.
Then slide the top of the mount into the bottom of the slide
rails on the unit. At first it will be a little tight because
everything is new but it will fit. >>>>>>>>>>>>>>>>>>>>
Gently slide the unit all the way down onto the mount until it
locks in position. >>>>>>>>>>>>
Next, feed from the cobra unit the wire and SAE plug under
your gas tank and route it to your matching SAE plug on your
battery harness and turn it on and you are set!
Look at the unit, and on the back you will see slide rails
where the mount slides into it. The opening for the slide rails
are at the bottom of the unit so put the unit above and slide it
down onto the mount