Elektron Analog Four - Manual (Page 54)

GLOBAL MENU
46
SEQUENCER CONFIG
Here settings relating to the sequencer can be found. Change settings by using the [LEFT]/[RIGHT] arrow keys.
QUANTIZE LIVE REC will when active quantize notes entered in LIVE RECORDING mode to full sequencer
steps. When the setting is deactivated, live recorded notes will where applicable be affected by micro timing.
Read more about micro timing in the section “NOTE MENU” on page 33.
KIT RELOAD ON CHG will cause kits to reload to their saved state automatically as soon as a new kit becomes
active. This is useful if you for example play live and have tweaked a kit, want to save it and then return to a pat-
tern featuring the same kit, but with its original settings.
MIDI CONFIG
In this menu various sub-menus dealing with the MIDI functionality of the Analog Four are found.
MIDI SYNC
Controls how the Analog Four receives and sends MIDI clock and transport commands. Change settings by
using the [LEFT]/[RIGHT] arrow keys.
CLOCK RECEIVE will when active make the Analog Four respond to MIDI clock sent from
external devices.
CLOCK SEND will when active make the Analog Four transmit MIDI clock.
TRANSPORT RECEIVE will when active make the Analog Four respond to system realtime
messages like play, stop, continue and song position pointer.
TRANSPORT SEND will when active make the Analog Four send out system realtime mes-
sages like play, stop, continue and song position pointer.
PRG CH RECEIVE will when active make the Analog Four respond to incoming program
change messages, which is useful when wanting to select patterns externally. The MIDI chan-
nel that will listen to incoming program change messages is set in the MIDI CHANNELS
menu, covered on page 48.
PRG CH SEND will when active send program change messages when patterns are changed.
The MIDI channel that will send program change messages is set in the MIDI CHANNELS
menu, covered on page 48.