Flylink Full HD G-sensor GPS - Manual (Page 5)

- 5 -
‹
Load and unload the battery
1. Battery indicators as below:
Full Half Low Empty
‹
Battery Recharge
2. This device can be charged through connecting the USB terminal of computer as well as
connecting charger.
‹
Connect to 12V/24V car charger as driving recorder
When used as driving recorder, it is required to turn on the Circulating Video Recording
and Automatic Video Recording Upon Start On, at the same time, connect it with the car
charger, when the vehicle engine is on, It will start video recording automatically; when the
vehicle engine is off, the data will be saved, and the device will shutdown automatically.
¾
Note:
Only the car charger with the output of 5V can be used for the power supply, or the
device could be damaged by the charger of other voltages.
‹
Insert in and take out the memory card.
1. Confirm the inserting direction of TF card, wrong inserting direction could damage the
camcorder and TF card;
2. Use the SDHC specification conforming high speed TF card, this TF card has the marking
of C4 or C6.
3. In the event of the storage card format cannot be compatible with the device, the device
could not read the card, and it is required to formalize the TF card.
‹
Turn on / off and auto off of video recorder
1. Press the power key for 1 second to turn on/off the device.
2. For saving the power capacity of battery, to set the automatic off time in the menu, the
device will turn off automatically when not any operation on the video recorder.
Operation