FRITSCH LABORETTE 24 with V-shaped channel - Manual (Page 25)

6 Cleaning
DANGER!
Mains voltage!
– Before beginning with cleaning work, disconnect the
mains plug and protect the device against being unin-
tentionally switched back on!
– Do not allow any liquids to flow into the device.
– Indicate cleaning work with warning signs.
– Put safety equipment back into operation after
cleaning work.
It is recommended to remove the funnel for cleaning.
The funnel and channel can be rubbed with a dry or wet cloth to cleaning
them thoroughly.
Components can be damaged by fluid entering the housing interior.
It is not permitted to use solvents. Solvents can damage plastic parts and
the coating.
The individual components can also be cleaned with water or solvent
after taking the funnel out of its holder and unscrewing the channel from
the armature. Then screw the channel back on again and replace the
funnel.
Cleaning
- 25 -