5 using the planetary mill, 1 cleaning duration, 2 continuous operation (position ∞) – FRITSCH LABORETTE 17, size II User Manual
Page 17: 3 short term operation, 5using the planetary mill
5
Using the planetary mill
The LABORETTE 17 is suitable for continuous operation. It is normal for
the lower device components to warm up during continuous operation.
This does not lead to damage. The heat generated in electrical compo-
nents will for the most part be transferred to the bath.
During continuous use, the device should be covered to reduce the
ambient noise.
Hang parts to be cleaned in the ultrasonic cleaner using an insert tray
made of stainless steel (Order no.: 17.3100.00 or 17.5100.00). When
cleaning with aggressive or expensive chemicals, use additional con-
tainers, which are immersed in the bath.
CAUTION!
Avoid flammable liquids.
Be careful when cleaning glued and oiled parts.
5.1 Cleaning duration
Generally, the cleaning duration is set as low as possible. Depending on
soiling and the cleaning liquid used (follow the instructions on the label),
the cleaning duration is approx. 1 to 15 min.
5.2 Continuous operation (position ∞)
n
Turn the control knob right to the "∞" symbol until it clicks è green
indicator light illuminates.
n
The device does not switch off automatically. To switch off, turn the
control knob back to "0".
5.3 Short term operation
n
Turn the control knob right, past continuous operation, to the
desired cleaning time è green indicator light illuminates.
n
The timer automatically switches off after the specified time.
n
The cleaning time can be shortened or the device switched off, by
turning it back.
Using the planetary mill
- 17 -