4 information about the timer, 5 important information about temperature, Using the planetary mill – FRITSCH LABORETTE 17, size II User Manual

Page 18

Advertising
background image

CAUTION!
Do not heat up disinfectants.

5.4 Information about the timer

Operating the timer:

n

The device can remain connected to the mains while switched off.

n

Disconnect from the mains by removing from the mains plug.

n

The timer cannot be turned left when the device is switched off

(position “0”)!

5.5 Important information about temperature

Information about temperature:

n

Heated-up cleaning liquid intensifies cleaning.

n

At higher temperatures the effect of the ultrasonic cavitation

decreases again. The best cleaning results are achieved with

aqueous solutions in bath temperatures of up to 60 °C.

n

Ultrasonic energy also heats up the cleaning fluid. With constant

noise and/or if the oscillating bath is covered, the liquid temperature

can exceed the set value on the thermostat more quickly.

n

Do not heat up disinfectants.

n

For the protection of the electronic components inside the ultra-

sonic device, the ultrasonic power is reduced at a critical tempera-

ture to prevent further increases in the interior temperature.

Using the planetary mill

- 18 -

Advertising
This manual is related to the following products: