GEA Bock HG44e - Manual (Page 23)

D
GB
F
E
23
96280-12.2014-DGbFEIRu
5| Electrical connection
Relay position INT69 G
B2 12 14 11
Fig. 24
5.8 Function test of the trigger unit INT69 G
Before commissioning, after troubleshooting or making changes to the control power circuit, check
the functionality of the trigger unit. Perform this check using a continuity tester or gauge.
Gauge state Relay position
Deactivated state 11-12
INT69 G switch-on 11-14
Remove PTC connector 11-12
Insert PTC connector 11-12
Reset after mains on 11-14