Char-Griller LP Gas Grill Grillin Pro 3001 - Manual (Page 15)

page 15
Fully Assembled
Step 18
Install Igniter battery by turning the Igniter push button cap counter-clockwise until the igniter button
detaches, then install a AA battery making sure the positive(+) end is under the push button. Then
re-attach the igniter button by turning it clockwise.
™ & © Char-Griller / A&J Mfg.
Caution: Use only the regulator provided!
If a replacement is necessary, please call our customer service department, 912-638-4724. Do NOT use
replacement parts that are not intended for this grill.
Hint: The paper label that is affixed to the hood is more easily removed when the hood is warm. Any
remaining glue residue can be cleaned off with a spray lubricant like WD-40
® .
Step 19
Tighten all BOLTS and NUTS.