Hardy Enviro Bench Scales - Manual

P
ROVIDING
S
OLUTIONS
I
N
:
Tension Control
Process Weighing
Vibration Monitoring
Local Field Service
9440 Carroll Park Dr. · Suite 150 · San Diego, CA 92121-5201· 858/278-2900 · 800/821-5831
Fax 858/278-6700 · Web www.hardyinst.com
Document Number: 0596-0320-01 Revision A
Quick Guide to Enviro Scale Setup
To enter menus press and hold Program/Enter
Press the Over/Under/Next key to scroll through selections.
1. Setup
2. Config
3. APP
4. Cal
5. Done
Press the Program/Enter key to enter the selection.
Keypad operation:
•
Program/Enter key = accept displayed value. Advance to next step
•
Over/under/next = scroll forward or moves flashing selection one place to right
•
B/G/NET = Backs up one step in programming mode.
•
UNITS = scrolls forward through choices or increments value selection.
•
1 = decrements selected digit value
•
TARE = moves backwards through selection or moves flashing selection one place to
left.
•
ZERO = Resets value to all zeros
•
Print = moves decimal place to the right.
The parameter settings in the Setup, Config, and APP menus will determine how the unit will
operate.
Setup Menu
•
Time Format for display and print out
o 12 hour format
o 24 hour format
•
Set-ti - Set time (always set in 24 hour format)
•
Set-da – Set date (MM.DD.YY)
•
Id - unit ID (1-32)
•
Port 1 (set serial port 1 output)
o Off – no serial output
o Poll – Computer polls for output
o Pollid – Computer polls for output using unit ID
o Contin – continuous output
o Button – transmit when print button pressed