Industrial Data Systems IDS DT220 User Manual
Page 25
DT220 Users Manual version 1.a Configuration Parameters
21
1 - AND: <status>, <mode>, <polarity><weight><units><terminate>
Status:
OL (overload), ST (stable), US (unstable, in motion)
Mode:
GS (gross mode), NT (net mode)
Polarity:
+ (positive weight), - (negative weight)
Weight:
7 characters data, NOT zero blanked, with decimal point
Units:
lb, kg, t (ton), tn (tonne), g<sp> (gram), oz
Terminate:
lf, cr (line feed, carriage return)
2 - CONDEC: <stx><polarity><weight><units><mode>>status><terminate>
Polarity:
space (positive weight), - (negative weight)
Weight:
7 characters, zero blanked, with decimal point
Units:
L (lb), K (kg), T (ton), G (gram), O (oz)
Mode:
G (gross mode), N (net mode)
Status:
<space> (valid weight), M (motion), O (over wt), I(invalid)
Terminate:
lf, cr (line feed, carriage return)
3 - WEIGHTRONIX: <mode1><mode2><polarity><weight><space><units><term>
Mode1:
space (gross mode), 0 (zero if net mode)
Mode2:
G (gross mode), N (net mode)
Polarity:
+ (positive weight), - (negative weight)
Weight:
6 characters, NOT zero blanked, with decimal point
Units:
lb, kg, oz, g <space>(gram), t<space> (ton), tn (tonne)
Terminate:
lf, cr (line feed, carriage return)
4 - OHAS:
<polarity><weight><space><units><2 spaces><mode><status><term>
Polarity:
space (positive weight), - (negative weight)
Weight:
7 digits, zero blanked, with decimal point
Units:
lb, kg, oz, g <space>(gram), t<space> (ton), tn (tonne)
Mode:
G (gross mode), N (net mode)
Status:
<space> (valid weight), M (motion), O (over wt), I(invalid)
Terminate:
lf, cr (line feed, carriage return)
5 - Transmits the contents of DT220 registers.
Data entered into a text register can include other register data. Example of register 128
(Text1) emulating a Condec format without the polarity or status in Gross mode with lbs
units. Set TX Continuous Format setting to 128 and configure text register 128 to:
<A2><F81>GL<A10><A13> this = stx, 7 chars of gross wt, G, L, lf, cr
<Rreg no> = buffer register data, minimum size (zero blanked no spaces)
<Freg no> = buffer data, 7 character field, zero blanked, right justified.
<Iprint item> = Embed print item
<Axx> = Embed ACSII code