Clarity D722 - Manual (Page 6)

8 9
1) Plug the power supply & line cord into the base station.
2) Plug the other end of power supply & line cord into the wall
socket, as shown.
3) Always use the cables provided in the box.
1) Slide out the battery compartment cover.
2) Place the two batteries as indicated. Follow the polarity.
3) Slide the battery compartment cover back.
4) Put the handset on the base and charge for 16 hours first
time. A beep indicates that the handset is properly placed on
the base or charger.
Use only NiMH rechargeable batteries.
NOTE: Please refer to the Battery Safety Instructions on page 6 for
proper use and disposal of the batteries.
INSTALLING YOUR PHONE
Line Cord
INSTALLING/CHARGING BATTERIES
We recommend you choose four photos of your most contacted
persons into the direct memory keys. Cut the photos to the same
shape and size of the protective films.
Using a ready-to-insert photo, insert one end of the protective film
into the groove of memory key location, bend and insert the other
end into the groove. Ensure the photos are properly installed.
WARNING: Do not place the films within reach of small children!