JMC Next-Gen Web Server Install - Manual

1
Section 5 – JMC Web Install
Now that you have your Windows 2008 Server setup, we need to install two pieces of software for JMC Web
on the server. These will install all the JMC Web pieces onto the server’s hard drive C:\inetpub\wwwroot
folder, which is the Default Web Site folder. You can find these installers in the Next Gen section of our web
site at
http://jmcinc.com/resources/nextgen . They are in the Tech tab to the right. Again, make sure you are
logged in as administrator to configure.
First, double-click on the JMC_Web_Suite, and click on Next on the first three screens. When it is finished
installing, click on Close.
Now install JMC Connection Strings by double-clicking on it and follow the instructions on the screen. The
JMC Web is now installed.
Section 6 – Configuring MySQL Workbench
Now let’s launch MySQL Workbench, so you can setup the database, etc., so go to the Start menu, and up to
All Programs, and then click on the MySQL folder, and then MySQL Workbench.
The first thing we are going to do is restore the JMC database, so at the first screen, click on Local MySQL
under the Server Administration section on the right side of the screen, and then click on Server
Administration right above it. Type in the root password that you created in the MySQL Community Server
install process, and click OK.
On the left, click on Data Import/Restore. To the right of that, click on Import from Self-Contained File. And
to the far right of that, click on the … button to navigate to the sql file you are going to restore.
At the navigation screen, find the file and highlight it. Then click on Open.