JMC Next-Gen Web Server Install - Manual (Page 18)

18
Here is what it looks like on a Macintosh client. First, click on the System DSN tab in the upper left corner, and
then Add… to the right. Click on the MySQL ODBC 5.1 Driver, and click on OK.
At the next screen, yours will look similar to below. You can put in any name you want in the Data Source
Name (DSN). You will need it later, so write it down. Put in your JMC Web server url or ip address, without the
https://, in the TCP/IP Server field. Then put jmcssl in the User, and the Password for jmcssl.
Click on the down arrow to the right of the Database field, and then click on your webjmc database in the list.
Click on the Test button to the right, and it will tell you it was successful, so click on OK, and then Apply. Then
click the X in the upper left corner to close.
Make sure the password for jmcssl has only 8 characters or less, and use only letters and numbers. If yours
isn’t that way, just go back into MySQL Workbench and change the password for jmcssl.
DSN : ________________________________________
User : jmcssl
Password : ____________________________________