Canon IXUS 1100 HS - Manual (Page 70)

Adding Effects and Shooting
70
You can choose to retain a single color and change the rest to black and white
in a composition.
Choose T.
z Follow Steps 1 – 2 on p. 62 to choose T.
Touch .
X The unchanged image and the Color
Accent image will alternately display.
X The color for default settings is green.
Specify the color.
z Position the center frame so it is filled with
the color you want and touch the frame on
the lower part of the screen.
X The specified color will be recorded.
Specify the range of colors.
z Touch op to change the range of colors
to be retained.
z Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z Touching ^ restores the shooting screen.
Shooting with Color Accent
Recorded color
• Using the flash may cause unexpected results in this mode.
• Depending on shooting conditions, the image may become coarse, or the
colors may not come out as expected.