Panasonic UF-490 - Manual (Page 52)

Sending Documents
52
Voice Mode Transmission
On-Hook Dialling
For On-Hook Dialling, follow the steps below.
NOTE 1 If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2 If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a "/").
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE TONE 5551234
1
Set document(s) face down.
DOCUMENT SET
2
You will hear dial tone through the monitor speaker.
ENTER TEL NO.
3 Dial the telephone number from the keypad.
Ex:
5551234
❚
4 When you hear a beep,
5 5 5 1 2 3 4
PAUSE
TONE