Troubleshooting – Panasonic UF-490 User Manual
Page 98
Troubleshooting
98
Communication
No dial tone
1. Check the connection of the telephone line.
2. Check the telephone line.
No auto answer
1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 32nd transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
No Unit Operation
No unit operation
To reset the machine, unplug the Power Cord for a few
seconds then plug it in again.
Mode
Symptom
Cause / Action
page