KEYENCE SL-VH1S - Manual (Page 11)

1-5
Bef
o
re Use
1
SL-VH1S-NO1-E
1-4
Installing the <SL-V Configurator>
This section explains how to install the <SL-V Configurator> on your computer.
Confirm the following before installing the software.
It is recommended that the CD-ROM be backed up in case of damage to or loss of the disk.

Hard disk space
The <SL-V Configurator> must be installed to a hard disk. The hard drive for installation must have at
least 30 MB (330 MB if .NET Framework2.0 is not installed) of free space. If there is not enough free
space on the drive, you must clear some space.

Installing to a Windows machine
The <SL-V Configurator> runs under a Windows operating system. It must also be installed on a
Windows operating system. Make sure that Windows XP/Vista/7 is installed and operating properly on
the target PC.

USB port
The USB port on the computer must be usable to upload configuration or monitor the SL-V series. Refer
to the user’s manual for your computer for more information.

Help files
The help file for the <SL-V Configurator> is a PDF file. Adobe Systems Adobe Reader must be installed
on your computer to use the help file.
Adobe Reader can be downloaded from the Adobe Systems website (http://www.adobe.com/).

User privileges
Set the following access rights if the <SL-V Configurator> is installed in the default folder (C:/Program
files/Keyence/SL-V Configurator/).
• Grant Administrator privileges to users who will be using the <SL-V Configurator>.

User privileges
Set the following access rights if the <SL-V Configurator> is installed in the default folder (C:/Program
files/Keyence/SL-V Configurator/).
• Grant Administrator privileges to users who will be using the <SL-V Configurator>.
If the "User account control" screen appears during installation, click "Continue"
Preparation
Note
Notes for Windows XP
Notes for Windows Vista/7