KEYENCE CV-X Series - Manual (Page 9)

KEYENCE CORPORATION. Vision System Division ‐ 9 ‐ www.keyence.com
3. Controlling the Controller
(PLC-Link) [MELSEC FX Series]
1
✎
Checking the Global Settings of the CV-X Series
On the "Global" menu, select [Communications & I/O] > [PLC-Link] to open the global "PLC-Link" settings
screen.
2
Check the setting items necessary for controller control.
Select the Command Execute Event.
Select Polling for Command Execute Event.
Check the data memory to use for the following three items.
‐ Command Address
‐ Command Complete Address (bit)
‐ Command Result Address
3
Select "OK" to close the global "PLC-Link" settings screen.
The data memory address to use can be changed.
Be careful not to specify an address of a data memory being used for another program of PLC.