KEYENCE CA-LH(G) Series - Manual (Page 2)

(1) KEYENCE warrants the Products to be free of defects in materials and
workmanship for a period of one (1) year from the date of shipment. If
any models or samples were shown to Buyer, such models or samples
were used merely to illustrate the general type and quality of the
Products and not to represent that the Products would necessarily
conform to said models or samples. Any Products found to be defective
must be shipped to KEYENCE with all shipping costs paid by Buyer or
offered to KEYENCE for inspection and examination. Upon examination
by KEYENCE, KEYENCE, at its sole option, will refund the purchase
price of, or repair or replace at no charge any Products found to be
defective. This warranty does not apply to any defects resulting from any
action of Buyer, including but not limited to improper installation,
improper interfacing, improper repair, unauthorized modification,
misapplication and mishandling, such as exposure to excessive current,
heat, coldness, moisture, vibration or outdoors air. Components which
wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various
Products. They are only suggestions, and it is Buyer's responsibility to
ascertain the fitness of the Products for Buyer’s intended use. KEYENCE
will not be responsible for any damages that may result from the use of
the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer
are not to be used internally in humans, for human transportation, as
safety devices or fail-safe systems, unless their written specifications
state otherwise. Should any Products/Samples be used in such a
manner or misused in any way, KEYENCE assumes no responsibility,
and additionally Buyer will indemnify KEYENCE and hold KEYENCE
harmless from any liability or damage whatsoever arising out of any
misuse of the Products/Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES
ARE PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER.
ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY
DISCLAIMED. IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED
ENTITIES BE LIABLE TO ANY PERSON OR ENTITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION,
ANY DAMAGES RESULTING FROM LOSS OF USE, BUSINESS
INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY
OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF
PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR
TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN
CONNECTION WITH THE USE OR INABILITY TO USE THE
PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS AFFILIATED
ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTY’S CLAIM
FOR DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some
jurisdictions, some of the foregoing warranty disclaimers or damage
limitations may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or
delivered to a third party, Buyer must provide such third party with a copy
of this document, all specifications, manuals, catalogs, leaflets and
written information provided to Buyer pertaining to the Products/
Samples.
E 1101-3
Dimensions
C-mount
1-32 UNF
Focus lock ring
M27(P=0.5)
φ30.0 φ21.0 φ33.0
41.6* 8.5(MAX.)
17.526
* This varies depending on the focal length.
Extension amount: 0 to 0.6 mm.
37.0* 5.2(MAX.)
Focus lock ring
M27(P=0.5)
φ30.0 φ22.0 φ33.0
C-mount
1-32 UNF
17.526
* This varies depending on the focal length.
Extension amount: 0 to 1.0 mm.
4.86(MAX.) 36.5*
Focus lock ring
M27(P=0.5)
φ30.0 φ22.5 φ33.0
C-mount
1-32 UNF
17.526 * This varies depending on the focal length.
Extension amount: 0 to 2.1 mm.
7.4(MAX.) 39.5*
Focus lock ring
27(P=0.5)
φ30.0 φ22.5 φ33.0
C-mount
1-32 UNF
17.526
* This varies depending on the focal length.
Extension amount: 0 to 4.5 mm.
38.8* 4.0
Focus lock ring
M27(P=0.5)
φ30.5 φ33.0
C-mount
1-32 UNF
17.526
* This varies depending on the focal length.
Extension amount: 0 to 6.5 mm.
4.0 56.2*
Focus lock ring
M27(P=0.5)
φ30.0 φ33.0
C-mount
1-32 UNF
17.526
* This varies depending on the focal length.
Extension amount: 0 to 15.8 mm.
CA-LH8G
CA-LH12G
CA-LH16G
CA-LH25G
CA-LH35G
CA-LH50G
WARRANTIES AND DISCLAIMERS
Copyright (c) 2014 KEYENCE CORPORATION. All rights reserved.
13063E 1074-1 96M13063 Printed in Japan