Casio SF-4985ER - Manual (Page 4)

2
Before using the unit for the first time
4. Load the new battery into the battery compartment, making sure that the
positive (+) side of the new battery is facing up (so you can see it).
5. Slide the battery holder back to its original position as indicated by the arrow
in the illustration.
6. Slide the battery switch to the “REPLACE 2, 3” setting and repeat steps 3
through 5 for the other batteries.
•
Be sure to load all three batteries, using CR2032 lithium batteries only. Never
mix old batteries with new ones.
7. Slide the battery switch to the “NORMAL” setting.
•
You will not be able to turn the unit on if the battery switch is not in the
“NORMAL” setting.
8. Replace the battery compartment cover.
9. Press
ON to switch power on.
•
At this time, one of the following messages appears on the display.
A B
•
If Message B appears, skip step 10 and continue from step 11.
•
If these messages do not appear, open the battery compartment and press
the RESET button. And then skip step 10 and continue from step 11.
10. Use
H to move the highlighting to YES, and press
SET .
•
This causes Message B to appear on the display.
11. Use
H to move the highlighting to YES, and press
SET .
•
After the RESET operation is complete, the LANGUAGE screen appears on
the display.
12. Use the procedure under “To select the system language” on page 5 to select
a system language.
13. Check the Home Time setting and make changes if necessary (page 71).
Battery holder