Kcs foip: suppression of redirecting number, Kcs foip: use redirecting number for fax calls – Kofax Communication Server 9.1.1 User Manual

Page 11

Advertising
background image

Changes in Behavior

Kofax Communication Server Release Notes

11

upgrading to this release. The new value prevents document conversion problems.

(SPR00091840)

For more information, see:
TC/PDD User Manual, version 3.03.00 edition 5

Chapter Hints - Advanced Printing Features May Cause Document Conversion Problems

KCS FoIP: Suppression of Redirecting Number

KCS Fax over IP can be configured to suppress the redirecting number; i.e., the number of the

party that has diverted the call is not evaluated. This function can be used e.g. if you want to

use a common voice mail box for multiple users. (SPR00092220)

To suppress the redirecting number

1 Using WConfig, for UFI channels, set the most significant bit of line 295, position 3 to 1.

E.g., if the current number was “01”, change it to “81” hexadecimal.

2 Enter a similar line to the number conversion lines of the UFI channels (starting with line

254):

Lxxxx=Vxxxx

Where xxxx is the number to which most of the phones are redirected, e.g. 5960.

3 Restart FoIP.

For more information, see:
KCS FoIP Technical Manual, version 3.13.05 edition 1

Chapter Integration with KCS - Supplementary Services - Call Diversion (Redirecting

Number) - Suppression of Redirecting Number

KCS FoIP: Use Redirecting Number for Fax Calls

By default, inbound fax messages can be distributed according to the called party number

(DDI/MSN). KCS FoIP can now be configured to use the redirecting number for fax calls.

(SPR00093076)

1 Using WConfig, for UFI channels, set the least significant bit of the line 286, position 8 to

1 (e.g. from “00” to “01”).

2 Enter similar lines to the number conversion lines of the UFI channels (starting with line

254):

ATN~=0~
ATI~=00~
ATS~=~

(PBX might send the redirecting number along with the flag national/international/

subscriber number. This flag has to be converted to the corresponding prefix.)

3 Restart FoIP.

If this feature is enabled and a redirecting number is present, the redirecting number is used

instead of the called party number.

This feature does not work if the redirecting number is suppressed.

Advertising