Kofax Express 1.1 - Manual (Page 10)

10 Kofax Express Getting Started Guide
Tip You must have an Internet connection to access the Kofax Express
activation Web site. If necessary, you can go to another computer with a
working Internet connection and activate your product license here:
http://activate.kofax.com/kofaxexpress/activate.aspx
2 User Identification: Type your name, company, and email address.
3 System Identification: Bypass the entries in this section, which is pre-
populated with computer information that is detected automatically.
4 Product Identification: Type the part number, serial number, and the product
code provided at the time of product purchase. This information is printed on
a label inside your installation disk case.
The other entries in the Product Identification section are pre-populated, based
on existing information supplied during the installation process. You cannot
update these entries.
5 License Code: If you already have a license code, type it here. Otherwise, it is
automatically filled in once you complete the next step.
6 Click Activate.
7 Do one of the following:
„
Click OK to clear the message that confirms successful license activation.
„
Click Retry if the Activate - Connection Failed window is displayed. If you
click Retry without success, click Cancel to display the Activate - No Internet
Connection window. Then follow the onscreen instructions, which explain
how to use another computer to activate the license.
Once you activate the license, automatic reminders are discontinued.
Note If you attempt license activation without completing it successfully, a
grace period is started. While the grace period is active, you can continue to
use all of the product features that are appropriate for your license level. If the
grace period elapses without successful license activation, the product
switches to demonstration mode. As a result, a stamp is applied to scanned
images, and limitations are applied to the release process.