Kofax DOKuStar Validation - Manual (Page 35)

DOKuStar Validation for Ascent Capture Page • 31
OnPreExported
This event will be fired after the user selected to close or suspend the batch, but before the batch is really closed. The
data are still present. If
OnPreExporting returns False , the closing process is aborted and the batch remains
open.
The closing mode ( Suspend or Close ) is handed over as a parameter.
Definition:
Private Sub Data_OnPreExported(ByVal Data As Data, ByVal Mode As ExportMode)
ExportMode can take the values:
ExportModeSuspend (= „Suspend“)
ExportModeNone (= „Close“)
The OnPreExporting event is a good place to do checks across the whole batch before being closed. See the
How Do I… chapter for an example.
Note: Following this event, no ActiveField or ActiveDocument . is defined. Trying to access this, for
example via Controller.ActiveField , will cause an error.
OnPostExported
This event is fired after the batch has been closed and all data has been transferred to Ascent Capture. The parameter
Data still contains the data just transferred.
Note: There is no OnPostExporting event. This event cannot be canceled.
Definition:
Private Sub data_OnPostExported(ByVal Data As Data, ByVal Mode As ExportMode)
OnImport, OnExport
These events are not supported in the Ascent Capture version of DOKuStar Validation. You will never get these
events.