Installation and set-up – Panasonic TC21S3RP User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION AND SET-UP
Choose
the
desired
language
from
the
OSD language selection.
Press TV/AV button to start ATF.
TV stations will be located and stored ready
for use.
OSD Laiguage
PL CZ RO
H PY G B
The
first
available
channel
wil
displayed.
Switch the VCR test signal 'Off'.
be
Programme change
Volume adjust
The TV stations will be stored in the order that
they have been found, if the order is not to your
preference it can be rearranged. Refer to the
Tuning menu Swap feature - see page 9 for
details.
IT IS IMPORTANT that you only use TV programme position ‘O' to view your VCR. If your VCR picture does not appear on
programme position ‘O' (the VCR position), it will be necessary to either adjust the RF channel of the VCR or to adjust the tuning of
the TV's programme position 'O' until the RF output of the VCR is received.
6