Panasonic FV-13VKML3 - Manual (Page 11)

MAINTENANCE I(CLEANING)
WARNING:
Disconnect power source before working on unit. Routine
maintenance must be done every year.
CAUTION:
1. Never use gasoline, benzene, thinner or any other
such chemicals for cleaning the ventilating fan.
2. Do not immerse motor in water when cleaning.
3. Do not soak resin parts in water over 140°F (60°C).
1. Clean grille. (Don't put into hot water. Use non-abrasive
kitchen detergent, wipe dry with clean cloth)(Fig.14)
2. The grille should be dry after cleaning.
3. Remove dust and dirt from fan body using a vacuum
cleaner. (Fig.15)
4. Using a cloth dampened with kitchen detergent, remove
any dirt from fan body. Wipe dry with clean cloth. (Fig.16)
5. Replace grille.
MAINTENANCE!! (REPLACEMENT OF LAMP)
WARNING:
1. Disconnect power source before working on unit.
2. This is a pin type lamp base and the lamp's glass is fragile. To remove, pull out carefully.
3. 4W night lamp has threaded base. Remove by turning counterclockwise.
4. Make sure the temperature of lens and lighting unit has cooled down before maintenance (cleaning)
or replacement of lamp.
1. Remove grille by pulling down one mounting spring.
Remove plug connector I and sensor unit,
(with sensor models only)
then pull down another mounting spring.
(Squeeze mounting spring and pull down carefully)
(Fig.17)
2. Remove the screw as shown in stepi of Fig. 18.
Remove the light cover as shown in step 2 of Fig.18.
3. Replace the fluorescent lamp (Panasonic
FHT32E35 32W) and/or the 4W night lamp.
(Fig.19)
Plug connector I
Mounting spring
Grille
Lighting unit
Remove
plug connector I
Fig.17
Light cover
Fig.18
PDF created with pdfFactory Pro trial version www. pdffactory. com