A&D Weighing BM-500 Addendum - Manual (Page 2)

2
External Control of the Ion Function (Static Charge Eliminator)
□
To assign the Ion function to the MODE key of the AD-8922A remote controller, select the
“
ionfnc ” (Static elimination) settings and change the “ 8922 ” (AD-8922A control) setting.
□ To assign the Ion function when using both the AX-T-314A-S external key plug and AX-SW128
foot switch (both sold separately), select the “
ionfnc ” (Static elimination) settings and change
the “ e-5 ” (external input control) setting.
Ion function control settings (added after the setting “ion”)
■
0 3 seconds
1 10 seconds
ion
Neutralization time
2 Manual operation (max. 10 min.)
■
off Do not control the Ion function with the
AD-8922A 8922
AD-8922A control on Assign the Ion function to the MODE key of
the AD-8922A.
■
0 1. PRINT key, 2. RE-ZERO key
1 1. PRINT key, 2. ION key
ionfnc
Static
eliminator
e-5S
External input control
(See the figure below
for terminals)
2 1. ION key, 2. RE-ZERO key
■
Factory setting
Terminal 1
Terminal 2
GND
*External key plug
AX-T-314A-S
(Sold separately)
New