A&D Weighing GH-252 - Manual (Page 53)

51
----------- A - & - D
MODEL ----- GH-300
S/N ----- 01234567
ID ------ LAB-0123
DATE -- 2004/07/01
START
TIME
---- 12:34:56
WT
-- +123.4567 -- g
WT -- +123.4612 -- g
WT -- +123.4623 -- g
WT -- +123.4634 -- g
WT -- +123.4511 -- g
WT -- +123.4534 -- g
WT -- +123.4712 -- g
WT -- +123.4645 -- g
END
TIME
---- 12:40:15
SIGNATURE
-
- - - - - - - - - - - - - -
Title block and end block
When mass values are recorded as GLP data, a "Title block" is inserted at the beginning and
an "End block" is inserted at the end of a group of mass values in the GLP report.
Notes
To output the report to an AD-8121B , use MODE 3 of the AD-8121B. If MODE1 is used,
select temporary dump print mode by pressing the STAT. key of the AD-8121B.
If the data memory function is used (except data 0 ), the "Title block" and "End block" can not
be output.
Key operation
1 With the weighing data displayed, press and hold the
PRINT key, then release the key.
5tart is displayed. The "Title block" is output.
2 The weighing data is output according to the parameter setting of the data output mode ( prt )
of the function table.
3 Press and hold the PRINT key until recend is displayed, then release the key.
The "End block" is output.
Setting of "info 1" Setting of "info 2"
AD-8121 printer format General format
Space, ASCII 20h
<TERM> Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
Title block
Manufacturer
Model
Serial number
ID number
Date
Time
Weighing data
Time
Signature
End block