Casio IT-9000 - Manual (Page 42)

E-40
6. Lay the SIM/SAM card cover down to close it and then slide it in the "Lock"
direction.
7. Fit the slot cover.
8. Load the battery pack.
Removing
1. Make sure that the power on the terminal has been switched off. If the power is still
on, press the power key to switch off.
2. Remove the battery pack.
3. Using the tip of a screwdriver or similar tool, lift up the tab on the slot cover and
remove the slot cover as shown in the illustration.
4. Slide the SIM/SAM card cover in the "Unlock" direction and lift up the end of the
cover to open it.