Casio IT-9000 - Manual (Page 60)

E-58
1 Terminal Detect
Switch This switch detects when the IT-9000 is mounted correctly on the
USB Cradle.
2 Mount Hooks These hooks are used to stabilize the IT-9000 when mounting it
on the cradle.
3 Removal Buttons Press when removing the IT-9000.
4 Power Supply/Data
Communication
Terminals Power is supplied to the IT-9000 via these contacts. Also used for
data communication.
5 Power Indicator
LED This LED indicates the power status and the mounting status of
the IT-9000.
Red: Power on, IT-9000 is not installed.
Green: Power on, IT-9000 mounted correctly.
6 Power Switch Turns the power on and off.
7 USB Client Port This port is used to transmit system data and fi le data (download,
upload) by connecting the USB Cradle to a PC using a USB
cable (DT-380USB-A). The dedicated driver must be installed in
the PC before connecting the USB Cradle to the PC.
8 USB Host Port This port is used to connect a corresponding USB peripheral
device.
9 Selector Switch This switch is used to switch between the USB host port and
USB client port.
A: USB host
B: USB client
10 AC Adaptor Jack Connect the AC adaptor (sold separately) here.