Casio XJ-S46 - Manual (Page 54)

54
To perform manual skew correction on the currently projected image
Note
z Skew correction automatically straightens the image of a document that is misaligned
on the document stage of the document camera. Under its initial defaults, the YC
Camera application is configured to perform skew correction automatically. You can
also turn off auto skew correction. If you do, you can use the following procedure to
adjust image alignment manually.
z This operation will affect only the image that is currently being projected. The
projection image produced the next time you release the shutter will be projected in
accordance with the settings on the YC Camera Application Setup Menu (page 55).
1 Press the [FUNC] key to display the YC Camera application function menu.
2 Use the [
T] key to move the highlighting to “Skew Correction” and then press
the [ENTER] key.
z This will straighten the projected image.
z Instead of steps 1 and 2 above, you can also perform skew correction of the projected
image by pressing the [ ] key.