Casio XJ-S46 User Manual
Page 59
59
Projecting the Screen Image of a Graphing Calculator
You can connect a CASIO graphing calculator to the Data Projector using a USB cable and
project the calculator’s screen image with the Data Projector. USB connection of the following
CASIO graphing calculators is supported.
z fx-9860G Series
To project the screen image of a graphing calculator
1
Set the graphing calculator up for data communication.
Enter the LINK Mode, and configure the “Wakeup” and “Capture” settings as shown below.
z Be sure to configure these communication settings before you connect the calculator to
the Data Projector.
z See the user documentation that comes with your calculator for details about configuring
these settings.
2
Turn on the Data Projector.
3
Use the USB cable that came with the graphing calculator to connect it to the
Data Projector as illustrated below.
z This will project an image of the graphing calculator from the Data Projector.
XJ-S36/XJ-S46
* The illustration shows the fx-9860G as an example.
USB Cable