Acronova DQ-5610 Series User Manual
Page 10
Operation Manual, DupliQ DQ-5610
Version 2.0
10
© 2010, Acronova Technology, Inc.
H
ARDWARE
I
NSTALLATION
Finding a Place for DupliQ
DupliQ should be placed on a fairly level surface, firm enough to
support the unit and discs. Always allow ample workspace for your
operation, with easy access to the blank and finished discs.
Do not expose the unit to direct sunlight or high humidity, as it may
cause the unit to malfunction.
Assembling Your Duplicator
Simply follow the steps below carefully to assemble your DupliQ:
1) Make sure the power adaptor is
unplugged from DupliQ, as well as,
turn off the power switch on the rear of
DupliQ.
2) Install the four pillars one by one onto
the input tray.
0 Warning…
There are two different sets of pillars, large
and small connectors. Please carefully
distinguish them, and place the similar
pillars diagonally across from each other.
3) Assemble the input tray on to DupliQ
from the bottom by carefully pressing it
firmly upward. Refer to the illustration
on the right.
0 Warning…
Before turning on the power, please make
sure that you have tightly compressed the
Input Bin onto the DupliQ.