Acura 2007 RDX - Owner's Manual - Manual (Page 100)

Press the SEL/RESET button. The
screen changes as shown above. The
highlighted number is the current
setting above or below the outside
temperature. Press the INFO (
/
) button repeatedly until the
number you want appears, then
press the SEL/RESET button to
enter your selection.
If you sometimes find that the
temperature reading is a few
degrees above or below the actual
temperature, you can adjust it by
following these instructions:
While METER SETUP is shown in
the CUSTOMIZE GROUP of the
multi-information display, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO (
/ ) button until
you see the above display.
Multi-Information Display
Adjust Outside Temp. Display
96
U.S.
Canada
Main Menu Table of Contents