Acura 2007 RDX - Owner's Manual - Manual (Page 364)

Test the lights to make sure the
new bulb is working.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Open the hood. Remove the
socket from the headlight
assembly by turning it one-quarter
turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it unlocks.
Open the hood. Remove the
socket from the headlight
assembly by turning it one-quarter
turn counterclockwise.
Turn on the lights to make sure
the new bulb is working.
1.
2.
3.
1.
2.
4.
5.
3.
4.
Lights
Replacing a Front Side Marker
Light Bulb
Replacing a Front Turn Signal/
Parking Light Bulb
360
BULB
SOCKET BULB
SOCKET
Main Menu Table of Contents