Acura 2006 TSX - Owner's Manual - Manual (Page 104)

While the multi-information display
shows ‘‘POSITION SETUP,’’ press
the SEL/RESET button on the
steering wheel. The display changes
to ‘‘MEMORY POSITION LINK’’ as
shown above. Press the SEL/RESET button. The
display changes as shown above.
Select ‘‘ON’’ or ‘‘OFF ’’ by pressing
the INFO button, and enter your
selection by pressing the SEL/
RESET button.
If ‘‘MEMORY POSITION LINK’’ is
‘‘ON,’’ the driver’s seat moves to the
position stored in the memory when
you open the driver’s door, using the
remote transmitter.
Refer to page for setting the seat
position memory. Also refer to page
for remote transmitter use.
142
131
CONTINUED
Position Setup
Multi-Information Display
Memory Position Link
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
103
Table of Contents Table of Contents