Installing a child seat – Acura 2006 TSX - Owner's Manual User Manual
Page 52

After properly securing the child
seat (see page
), route the
tether strap over the seat-back.
Follow steps 2 and 3 from the
previous column.
After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
1.
2.
3.
1.
2.
Installing a Child Seat
Using the Center Anchor
Using an Outer Anchor
Dr
iv
er
and
P
asseng
er
Saf
e
ty
51
TETHER STRAP HOOK
TETHER STRAP HOOK
ANCHOR
ANCHOR
Table of Contents
Table of Contents