Acura 2001 Integra Sedan - Owner's Manual - Manual (Page 210)

Lights
Replacing Rear Bulbs
(in Trunk Lid)
1. Open the trunk.
2. Use a Phillips-head screwdriver to
remove the two screws from the
bulb holder. Remove the holder
from the taillight assembly.
3. Determine which bulb needs
replacing: tail/spotlight or back-up
light. Remove that bulb from the
socket by pushing it in slightly and
turning it counterclockwise.
4. Install the new bulb in the socket.
Test it to make sure it works.
5. Reinstall the bulb holder assembly.
Install the two screws and tighten
them securely.
Replacing a Rear License Plate
Bulb
1. Remove the two screws and
remove the license plate light
assembly.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Maintenance
CONTINUED
Main Menu Table of Contents