Acura 2000 TL - Owner's Manual - Manual (Page 242)

Lights
2. Determine which of the four bulbs
is burned out: stop/taillight or turn
signal light, back-up light
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket
Push the new bulb straight into
the socket until it bottoms.
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal
8. Put the fastener in the hole on the
side of the trunk lining and push
on the center until it locks (the
center is flush with the head).
9. Screw the cargo net mounting
button back into the hole.
Maintenance
Main Menu Table of Contents