Acura 2000 TL - Owner's Manual - Manual (Page 48)

Additional Information About Your Front Airbags
How the SRS Indicator Light
Works
The purpose of the SRS
indicator light is to alert
you to a potential problem with your
front airbags. This light will also
alert you to a potential problem with
your side airbags or passenger's side
airbag automatic cutoff system (see
page
47 ).
When you turn the ignition ON (II),
this indicator will light up briefly
then go out. This tells you that the
system is working properly.
However, if the light comes on at any
other time, you should have the
system checked by your dealer. For
example:
•
If the SRS indicator light does not
come on after you turn the ignition
ON (II)
• If the light stays on after the
engine starts.
• If the light comes on or flashes on
and off while you drive.
If you see any of these indications,
your front or side airbags may not
deploy, or your passenger's side
airbag automatic cutoff system may
not work properly. See your Acura
dealer as soon as possible.
Ignoring the SRS indicator light
can result in serious injury or
death if the airbags or cutoff
system do not work properly.
Have your vehicle checked by a
dealer as soon as possible if
the SRS light alerts you to a
potential problem.
Driver and Passenger Safety
SRS
Main Menu Table of Contents