AltiGen IP 710 - Manual (Page 27)

IP 710 Manual
19
Network Settings
Boot
Download System >
Boot Download
After firmware image upgrade, this
setting changes to No. Used mainly
for upgrading or troubleshooting. On
the next boot, the IP phone will
download the new firmware from the
TFTP server, if set to Yes.
Emergency
Number System >
Emergency Num
Sets the IP phone’s emergency
number. For the U.S., the emergency
number is 911.
Emergency
Gateway System >
Emergency GW
Sets the IP phone’s emergency
gateway IP address
Enable SIP
Registration
System >
Enable SIP
Registration
Enables SIP registration to the
emergency gateway
Version
Information
System >
Version Info
[Read only]
Displays the version number of the
IP phone.
Auto-
discover System > Auto
Discover Enables automatic discovery of the
server IP address via DHCP option
E911 LID System > E911 LID
Sets the IP phone’s E911 Location
ID.
Setting Menu Path Description
Enable DHCP
Network >
Enable DHCP
Sets whether Dynamic Host
Configuration Protocol (DHCP) is
being used by the IP phone to retrieve
a new IP address upon boot up.
Local
Address Network >
Local Address
Sets the IP phone’s local address;
shows only if DHCP is disabled.
Network
Mask Network >
Network Mask
Sets the IP phone’s network mask;
shows only if DHCP is disabled.
Setting Menu Path Description