AltiGen MAXCS 7.5 New Features Guide - Manual (Page 11)

MaxCS 7.5 New Features Guide Page 11 of 22
Managing IP Network Bandwidth
Also in Enterprise Manager, the Servers > IP Networks tab has been updated.
Instead of specifying the maximum number of sessions per each codec, as in previous releases, in release 7.5 you
specify the maximum number of sessions per bandwidth range.
The actual network bandwidth required for the bit rate range is used for the bandwidth calculation. 33 to 64 Kbps
bit rate is translated into 100Kbps network bandwidth, which includes LAN and IP/UDP/RTP header overhead. 16
to 32Kbps and under 16Kbps are translated into 65 Kbps and 40 Kbps, respectively.
The maximum number of allowed G.711 and G.722 codecs appears by default. You can lower these numbers by
clicking the down arrow until you reach the desired amount.
After the maximum number of sessions has been reached, the call negotiated with this codec bit rate will be
rejected. Also, after the total bandwidth utilization of all the codecs exceeds the value specified in Bandwidth for
VOIP parameter, new calls cannot be established.