AltiGen MAXCS 7.5 New Features Guide - Manual (Page 6)

MaxCS 7.5 New Features Guide Page 6 of 22
o Managing Codec Priorities
o Managing IP Network Bandwidth
o Codec Negotiation
o Codec Upgrades
o Codec Preference for Incoming SIP Trunk Calls
o Codec Preference for Outgoing SIP Trunk Calls
• Media Enhancements
o Media pass-through (HMCP)
o T.38 pass-through
o FoIP extension
o FoIP Hunt group
o Fax routing
• Enhanced SNMP trap monitoring
o SIP Trunk group status
o Out of license condition
o Out of Codec/SIP Trunk channels conditions
o Abnormal conditions (911, suspicious frauds, malicious SIP)
• HMCP tool enhancements
o DPC Latency measurement
o Generating Disk IP Load
o Generating CPU Load
o G.722 Codec Load
• Additional enhancements, which include a new repeating recording tone for workgroup call recording, a
checkbox for blocking unauthorized SIP invite requests, and a SightMax version field – See Additional
Enhancements starting on page 19.
• Client enhancements
o Handling client calls via some models of Polycom phones (requires an Advanced license)
o Client auto-answer with some models of Polycom phones (requires an Advanced license)
o Synchronize only Private Contact folders
Features No Longer Supported in Release 7.5
As of Release 7.5, MAXCS no longer supports the following features:
• ACC is not longer supported
• Windows 2003 Server OS for Softswitch is no longer supported
• TAPI is no longer supported
• H.323 SIP Tie-Trunk is no longer supported
Important: Any IP Dialing Table entries that have H.323 set for the Protocol field must be changed to SIP
before you upgrade to release 7.5
• The TLS enabled and SRTP disabled settings are no longer supported