AltiGen MAXCS 7.5 Polycom Configuration Guide User Manual
Page 12
Polycom Configuration Guide
Page 12 of 24
Figure 15: The Polycom configuration tool TLS Applications panel
10.
Select Settings > Provisioning Server > DHCP.
•
Set Boot Server to Static
Note: For some phone models, the DHCP options are found under Settings > Provisioning Server.
Figure 16: The Polycom configuration tool DHCP menu
11.
Select Settings > Provisioning Server.
•
Set Server Type to HTTPS
•
Set Server Address to the MAXCS System IP address (in our example, this is 206.40.10.25) – use the
public IP address for external IP phones; use the private IP address for internal IP phones
•
Set Server User to the extension number (in our example, this is 266)
•
Set Server Password to 5656 (or whatever password you entered as the IP extension’s SIP
Registration password on page 7)
Figure 17: The Polycom configuration tool Provisioning Server panel
12.
The phone should reboot automatically. If it does not reboot, select Utilities > Reboot Phone. The phone
should register after it reboots.