AltiGen MAXCS 7.0 Update 1 MultiVOIP Configuration User Manual
Page 10
MAXCS 7.0 Update 1MultiVoIP Configuration Guide
Page 10 of 27
Follow these steps to configure the SIP extensions:
1.
In MaxCS Administrator, select Extension Configuration.
2.
Add two virtual extensions, 251 and 252, with the following parameters:
•
For Type, select IP Extension
•
Check Enable IP Extension
•
Select Static IP Address
•
Set Static IP Address to 10.10.101.81 (the IP address of the MultiVoIP gateway)
3.
Open the MultiVoIP configuration tool.
4.
Select Configuration > Voice/Fax and configure these parameters:
•
Set Select Channel to Channel 01
•
Set DMTF to Out of Band - Fixed Duration
•
Set Out of Band Mode to SIP Info
•
Set Coder to Manual
•
Set Selected Coder to G.729@8kbps
•
Set Auto Call/OffHook Alert to None
5.
Click Copy Channel to apply the settings to all channels.