American Access Systems Advantage DKE - Metal - 26-100L - Manual (Page 3)

Page 3 American Access Systems / Security Brands, Inc.
PARTS CHECKLIST
Enclosed with this box you should have the following items.
Qty Description
1 Control Station
4 1/4 by 1/2 carriage bolts (Post mount units only)
4 1/4-20 hex nuts (Post mount units only)
If any of the above items are missing from this box, contact American Access Systems
Tools Needed For Basic Installation
‡ ‡ :ire nuts or appropriate connectors
‡ ‡ :ire strippers
‡ ‡ :ire cutters
‡ ‡ 3/” drive ratchet with ” extension and 7/” socket (Post mount units only)
‡ ‡ Digital or Analog multimeter
TECHNICAL/CUSTOMER SUPPORT
1-303-799-9757 OR
[email protected]
INTRODUCTION
Your new DKE unit is a high quality, commercial grade, programmable digital key control station. The unit
incorporates a single relay with a normally open and normally closed output. The DKE is housed in a  guage steel
enclosure with a powder coat Ànish for durability and also includes a membrane keypad. Please be sure to read
and understand all instructions before proceeding with the hookup and programming instructions.
BEFORE PROCEEDING
To take full advantage of the 24 month limited warranty, you must be registered with American Access SystemsS.
Please read the enclosed warranty statement, (pg 2), Àll out the warranty registration card provided and send it to
1675 West Yale Ave.
Englewood, CO 80110
phone: 303-799-9757
fax: 303-799-9756
[email protected]
www.securitybrandsinc.com
SECURITY BRANDS INC